2020. 2. 7. 17:08ㆍ카테고리 없음
- Qio-tb Sonnet Qio Professional Universal Media Reader For Mac Pro
- Qio-tb Sonnet Qio Professional Universal Media Reader For Mac Mac
. User’s Guide for Qio Professional SxS Media Reader & Writer ™ ™ Windows. 4 Mac User’s Qio E3 Connection Steps. 4 Connecting Qio E3 to a MacBook Pro WITH a Thunderbolt Port Connecting Qio E3 to a MacBook Pro WITHOUT a Thunderbolt Port Connecting Qio E3 to a Mac Pro 5 Windows User’s Hardware Installation and Connection Steps. 6 A – Express Bus Extender PCIe 2.0 Installation Steps B – Connect Qio E3 to a Desktop Computer B – Connect Qio E3 to a Laptop Computer 6 Windows User’s BIOS Setup and Software Installation Steps.9 A – BIOS Settings Change for Desktop Users A – BIOS Settings Change for Laptop Users B – Software Download C – SxS Drivers Installation 7 SxS Media and ExpressCard/34 Adapter Card Use.11 Inserting and Removing Cards Using the Sonnet PCIe Bus Extender ExpressCard/34 Adapter SxS Memory Card Write Protect Switch 8 Using Drives Connected via eSATA. 12 Mac Users: Connecting/Disconnecting Drives Mac Users: Formatting Drives Windows Users: Connecting/Disconnecting Drives Windows Users: Formatting Drives 9 Tips and Known Issues.13 Tips Known Issues 10 Specifications, Precautions, FCC Compliance, and Support Information. 1 4 Specifications Safety Precautions FCC Compliance Contacting Customer Service.
This shared form factor and connector make ingesting footage from your sxs media a simple task in expresscard slot equipped notebook computers insert the card and go. Card interface for windows qio with expresscard 34 card interface for windows qio e3 e34qio e3 with expresscard 34 interface for windows qio with thunderbolt interface kit for mac.
™ Package Contents—QIO-E3-E34 1 – S onnet PCIe Bus Extender ExpressCard/34 adapter 2 – Q io E3 professional SxS media reader/ writer (enclosure) 3 – Carrying case 4 – 1 -meter external PCIe x1 interface cable 5 – U niversal 12V power supply with 10-foot cable Package Contents—QIO-E3-PCIE 1 – Sonnet Express Bus Extender PCIe 2.0 adapter card 2 – Q io E3 professional SxS media reader/ writer (enclosure) 3 – Carrying case 4 – 1 -meter external PCIe x1 interface cable 5 – U niversal 12V power supply with 10-foot cable. Chapter 2 – Qio E3 Enclosure Description 1 – Power Indicator LED 2 – SxS Media Slots This indicator lights when Qio E3 is powered, the Sonnet These slots accept both SxS memory cards and ExpressCard/34 adapter card is installed properly in its slot, the PCIe cable adapter cards. You may use Sonnet memory card readers between the two is plugged in securely, and the computer (sold separately) in these slots to work with CF, Memory Stick, powered on SDXC™, SDHC™, SD, MMC, and xD-Picture memory cards 3 – Security Slot 6 – 12VDC Output Socket This slot works with Kensington brand and similar security Use this socket to power a connected Sonnet Fusion F2 ® ™ locks to secure the Qio E3 enclosure and deter theft or F2QR 2-drive RAID SATA storage system. DO NOT CONNECT POWER INPUT CABLES HERE 4 –. Click “Click here”. Any of its components.
When the License Agreement page appears, read the license, D – Express Bus Extender PCIe 2.0 Installation Steps and then click I Agree; the software will start downloading automatically. If you purchased the QIO-E3-PCIE, install the PCIe adapter card into your computer after installing the software. Otherwise, go to B – Qio E3 System Software Installation Steps the next page.
Locate and double-click the Sonnet.dmg file you downloaded; a QIO E3 System x.x.x Installer window will open. If you haven’t already done so, shut down your computer, and then open it to access the expansion card area (PCI 2. Double-click the Qio E3 System Installer x.x.x.mpkg file Express slots); refer to your computer’s user manual for specific inside the QIO System x.x.x Installer window to launch the information. Installer; when the Welcome to the Qio E3 System Installer window appears, click Continue. S upport Note. Chapter 3 – Mac User’s Software/Hardware Installation Steps D – Express Bus Extender PCIe 2.0 Installation Steps (continued) 5.
If you installed the card into a Mac Pro (Mid 2010), Mac Pro (Early 2009), or Mac Pro (Early 2008), proceed to to Chapter 4 – Mac User’s Qio E3 Connection Steps. If you installed the card into a pre-2008 Mac Pro, turn it on. Depending on which version of Mac OS X your computer is running, Expansion Slot Utility will open. If it does not open by itself, you must do so manually (Expansion Slot Utility is located in the /System/Library/CoreServices folder). Select the appropriate configuration (your Sonnet card is an x1 card), and then click Quit if the default configuration was appropriate, or click Save and Restart if you changed the configuration. Shut down your computer, and then proceed to Chapter 4 – Mac User’s Qio E3 Connection Steps.
Chapter 4 – Mac User’s Qio E3 Connection Steps Connecting Qio E3 to a MacBook Pro WITH a Thunderbolt™ Port It is important that you connect the PCIe Bus Extender ExpressCard/34 adapter and the Qio E3 enclosure in the proper order; if your MacBook Pro has a Thunderbolt port, you must plug in the PCIe Bus Extender ExpressCard/34 adapter AFTER turning on your computer. After installing the software, do the following: 1. Connect the external PCIe x1 interface cable to the PCIe Bus Extender ExpressCard/34 adapter. Connect the other end of the interface cable to the Qio E3 enclosure. Connect either the AC adapter or the optional XLR power cable (connected to a battery or other power source). Note that the Power Indicator LED on the Qio E3 will not light until after you insert the ExpressCard/34 adapter into the ExpressCard slot.
Turn on your computer. Insert the PCIe Bus Extender ExpressCard/34 adapter into your computer’s ExpressCard slot; Qio E3 is ready for use. Chapter 4 – Mac User’s Qio E3 Connection Steps Connecting Qio E3 to a Mac Pro It is important that you connect and power Qio E3 in the proper order, before you turn on your computer: 1. Install the software and Bus Extender PCIe 2.0 adapter card as described in the previous chapter. Connect the external PCIe x1 interface cable to the Bus Extender PCIe adapter card in your computer.
Qio-tb Sonnet Qio Professional Universal Media Reader For Mac Pro
Connect the other end of the interface cable to the Qio E3 enclosure. Connect either the AC adapter or the optional XLR power cable (connected to a battery or other power source). Note that the Power Indicator LED on the Qio E3 will not light until after you turn on the computer. Turn on your computer; Qio E3 is ready for use. If you purchased the QIO-E3-PCIE, install the PCIe adapter card finish installing the PCIe adapter card and close the computer. Into your computer first. Otherwise, skip to the next page.
Remove the Sonnet card from its packaging, and then install 1. Shut down your computer, and then touch an expansion it into the slot; make sure the card is firmly seated and card access cover on the back of the computer to discharge secured. Chapter 5 – Windows User’s Hardware Installation and Connection Steps B – Connect Qio E3 to a Laptop Computer Connect the PCIe Bus Extender ExpressCard/34 adapter and the Qio E3 enclosure in the proper order, before you turn on your computer: 1. Connect the external PCIe x1 interface cable to the PCIe Bus Extender ExpressCard/34 adapter.
Insert the PCIe Bus Extender ExpressCard/34 adapter into your computer’s ExpressCard slot. Connect the other end of the interface cable to the Qio E3 enclosure. Connect either the AC adapter or the optional XLR power cable (connected to a battery or other power source). Note that the Power Indicator LED on the Qio E3 will not light until after you turn on the computer. Proceed to Chapter 6 – Windows User’s BIOS Setup and Software Installation Steps. ROM in the computer’s BIOS. It may be necessary to disable at least ROM in the computer’s BIOS, and possibly move the Sonnet card to one additional option ROM to support all of the Qio’s features.
Qio-tb Sonnet Qio Professional Universal Media Reader For Mac Mac
If a different slot. Chapter 6 – Windows User’s BIOS Setup and Software Installation Steps B – Software Download (continued) 5. When the window showing the contents of the.zip file appears, locate and click the Extract Files button. When the Extract Compressed (Zipped) Folders window appears, click Browse.
When Select a destination window appears, click to choose a destination, and then click Extract. C – SxS Drivers Installation 1. Open the SxSUDFvXxxandDeviceDriversvXxx folder.
Open the two ReadMe files, read them, and then follow the steps provided to install the device driver and UDF driver.
Sonnet Echo Thunderbolt to ExpressCard/34 Adapter Pro Harnessing both the incredible speed and powerful flexibility that the Thunderbolt interface offers, Sonnet presents a product that opens the range of ExpressCard devices to computer systems with no or little expandability. The Echo Thunderbolt to ExpressCard/34 Adapter Pro allows Thunderbolt equipped iMacs, MacBook Airs, MacBook Pro, and Mac minis, to now take advantage of high end devices like eSATA 6Gb/s, add additional FireWire 800 ports, and even utilize PCIe based SDXC UHS-I or UDMA6 CompactFlash Readers at full throughput! Even more exciting is that fact that these systems can now use speciality products one only available for use with high end machines featuring built in expansion slots. Examples include Universal Media Reader, the AJA io Express, or the Matrox MX02 family of products.
This updated model supports the faster ExpressCard 2.0 standard. Set up for this Sonnet adapter is simple—just connect it directly to your computer or at the end of a Thunderbolt device chain with a Thunderbolt cable (not included, )—that's it. There's no software to install and no power supply to plug in.
Plug the ExpressCard/34 card into the Echo ExpressCard/34 Thunderbolt Adapter as you would into a notebook computer's ExpressCard slot, install software for the adapter if necessary, and you are ready to work. Sonnet's Echo ExpressCard/34 Thunderbolt Adapter gives you the additional connectivity you need, today. Please see before purchasing this device. Price Add to Cart SON-ECHOPRO-E34 Sonnet Echo Thunderbolt to ExpressCard/34 Adapter Pro Requires Thunderbolt Cable to connect to host system (sold separately) Please see before purchasing this device.
$169.95 Optional Accessories CAB-TB-0050C Thunderbolt Cable Active Copper White 0.5m/1.6F N/A More Thunderbolt Cables View our entire selection of Thunderbolt Cables. Search Page Navigation. Sales & Specials Free Shipping Free shipping for online orders of $100 dollars or more to destinations within the continental USA.
We use FedEx Ground, USPS Priority Flat Rate, and USPS First Class Mail at our discretion depending on destination and item being shipping. FedEx Ground is a 1-5 business day service with. USPS Priority Flat Rate is a 2-3 business day service with. USPS First Class Mail is a 2-3 business day service with. SuperSpeed Reader USB 3.0 Memory Card Reader supports over 50 types of flash memory media cards ExpressCard, Sonnet, Thunderbolt.